Name:
Date:	(mm/dd/yy)
Time:	(use 24 hour clock)

Checklist

1. Target
   [Detailed instructions]

   Yes | No
   pump out target, isolate and check dP/dt for sign of leak
   pump out cleaning trap
   fill LN2 dewar, cool trap
   load trap (if H2 gas)
   

2. Separator Vacuum
   [Detailed instructions]

   Yes | No
   pump down, check pressure at high vaccum
   remove any unnecessary bypassing of interlocks

3. Magnets and electrostatic dipoles
   [Detailed instructions]

   Yes | No
   turn on and check readbacks
   

4. Diagnostics
   [Detailed instructions]

   Yes | No
   insert/retract BCM's, FC's; check FC Bias supplies
   calibrate slits

5. CCD Camera
   [Detailed instructions]

   Yes | No
   camera on, adjusted correctly to see spot
   make sure camera figure can be viewed remotely via VNC server

6. BGO array
   [Detailed instructions]

   Yes | No
   check all channels counting (in DAQ histos) using source
   adjust HV for gain matching

7. Elastic monitor

   Yes | No
   apply bias voltage
   check signal in DAQ using pulser

   Do only one of 8 or 9

8. Strip detector

   Yes | No
   check for alpha source counts on all strips

9. Ion chamber
   [Detailed instructions]

   Yes | No
   check the ion chamber

10. MCP

    Yes | No
    check insertion/retraction of MCP, foils work
    visual check that foils are intact
    check that bias can be applied to MCP, mirror

11. Safety
    [Detailed instructions]

    Yes | No
    check all fence panels in place (if radioactive beam)

Comments: