>Minutes of Meeting of Oct. 26, 2004
>
>LB,AO,GR,CR,MT,JDA,DH, CV, Wolf,JP,DG
>
>last weeks minutes: approved without comment
>
>DH reports on safety review of IC change, went just fine. Mike Laross
>implemented epics controls, DFOT tested non-isobutane parts, commissioning
>and debugging will take place in afternoon.
>
>JP reports on substantial rewrite of analyzer to simplify and implement
>calibration.
>
>AO: made some changes and now MIDAS runs slightly more reliably than
>before. AO found the EPICS thread in some funny state causing problems...
>
>Beam plans this week/weekend:
>
>23Na beam:
>
>1. measure Er at 515 keV/u for energy calibration for 21Ne(p,g)
>
>2. measure Er at 138 keV/u, 150 keV/u beam energy for 23Na(p,g), also 160
>or 170
>
>3. Measure difference in IC energy spectra using conventional window and
>new SiN 5x5mm thin window.
>
>MT and DG have started merging different GEANT simulations; they had two
>separate ones. They are checking consistency.
>
>22Na(p,g) justification presented by JC. Many issues raised in the details
>of the experiments, especially wrt target characterization.  It is decided
>to use stable sodium to make the targets first, perfect the process, then
>move on to 22Na.
>
>Science priority list approved, with changes
>
>E995 (11C(p,g)): JDA will be proceeding with Alternate Prod. Study  by 
>introducing
>13CO2 into ECR on the off-line test stand, as precursor to 11C, to learn 
>about efficiency of ECR for
>  CO2 and to mimic the C11 production system.  Many issues were raised 
> regarding testing.  Meetings will
>follow...
>
>ended at 11:46